How To Fix When Garmin Gps Not Working After Update?

Have you recently updated the Garmin GPS to your latest version? A lot of users have discovered that Garmin Gps Not Working After Update.

Plenty of reasons might be responsible for the error. We need to find the reason and troubleshoot it.

To fix the glitch, let’s move ahead and see how to fix it.

Here are some other common issues of Garmin GPS devices:

• Garmin GPS not working.
• Garmin Map Crashing.
• Nuvi Stopped working.
• The touch screen is not Responsive.
• Garmin GPS won’t turn on.

Solution When Garmin Gps Not Working After Update

These are some common troubleshooting steps that will fix the “Garmin GPS Not Turn On” error.

1. Make sure that the Garmin Gps device is fully charged.
2. Perform a hard reset on the device if your Garmin Gps Not Working After Update. A hard reset will erase all the data from your GPS device.
3. To perform it, remove the device from the power vent.
4. Press and hold the power button that is given at the bottom right corner of the device. Keep your finger there for a while.
5. Press “Yes” on the screen and follow all the on-screen instructions. This will reboot your device and clear up any software-related errors.
6. Make sure that the GPS antenna is properly plugged into the device.
7. Once done, do check if the Garmin GPS device is working properly or not.

If you have tried the above-given steps but there is no improvement in the current state then delete the “Garmin Map Update”.

Using the below-given steps you can delete the latest update:

1. Using the above-mentioned steps, reset the Gps device and then connect it to your PC using a cable.
2. Download the Garmin Express app on your PC and then complete the registration. The Garmin Express will search for the latest “Garmin Gps Update” automatically.
3. If you are unable to find any Garmin Update dashboard here then select Home Icon. it is given at the top left corner of the Express Software Window.

Sometimes, an expert’s eye is required to fix the glitch.

Try These Steps When Garmin Gps Not Working After Update

1. Go to the start menu and type “RUN” and press “Enter”.
2. In the search field, type “services.msc” and click “Enter”.
3. A new window will be opened when you press enter. In the Window, locate the “Garmin Core Update Service” option and click right on it.
4. Click to choose “Properties” and then tap on the “Log on” tab.
5. When a new window will be opened, click on the radio button with the name “This Account”.
6. Go to the “Account Field” and type “Network Service”. Don’t forget to delete all the passwords.
7. You will be asked to confirm your action. So, press OK and save your recently made settings.
8. Click on the “Garmin Core Update Service” again and click on “STOP”. On the same window, repeat the action but this time select the “Start” option instead of “Stop”.

Doing this will fix the error “Garmin Gps Not Working After Update”.

Conclusion

When Garmin Gps Not Working After Update, choose to follow the steps mentioned in the guide above. Following the steps in the given order will troubleshoot the error. In case, the issue is still causing trouble then get in touch with our experts today!